Fixed Guide Awnings
Fixed Guide Awnings
Fixed Guide Awnings are an extremely effective and low cost option, ideal for high or out of reach windows, that are not easily accessible.
Fixed Guide Awnings do not have locking arms like other models but rather a circular guide on the bottom bar which runs up two metal rods on either side, giving the awning the flexibility of stopping at any point without having to secure the base rail.
Easily operated internally or externally by cord and pulley, motor or crank, for those installed on the ground level.
Minimum Width
965mm.
Maximum Width
4865mm.
Minimum Drop
900mm.
Maximum Drop
3600mm.
Operation
Spring operation.
Tube
50mm or 63mm Tube depending on the width or drop.
Valance
Straight Valance, screens will come with weld along the bottom.
Headbox Colours
White, Woodland Grey, Classic Cream (Primrose), Heritage Red, Mist Green, Caulfield Green, Mountain Blue, Black, Monument, Paperbark, Jasper.
Base Rail Colours
White, Woodland Grey, Classic Cream (Primrose), Heritage Red, Mist Green, Caulfield Green, Mountain Blue, Black, Paperbark, Jasper.
Joins
Fabric will be joined to achieve the least amount of wastage.
Hardware Supplied
1 Pair of Fixed Guides same sizes as the drop of the blind
1 Pair of 300mm L Brackets
I Pair of Side Guide Runners
1 x 110mm cleat
Drop plus 3 metres of 5mm cord.
1 Pair of 300mm L Brackets
I Pair of Side Guide Runners
1 x 110mm cleat
Drop plus 3 metres of 5mm cord.
Required Measurements
Blinds @ Outside Box Measure (OBM).
Crank
Additional charges apply – please refer to price list.
Motorisation
Must be direct wired – molex cannot be used.
(see external motorisation sheet)
(see external motorisation sheet)
Valance
If scallop finish or no valance required please specify.
Joins
Centre joins and panels are available. Surcharge applies. (Please refer to pricing guide for additional charges). Please note joins will not be made closer than 500mm to the edge of the blind.